The Palm Oil

Oil palm, Elaeis guineensis, was introduced to Malaya in 1870 from West Africa. This hardy crop starts bearing fruit within 2 1/2 to 3 years and keeps bearing fruit for up to 25 years, making it the longest yielding crop in the world.

The fleshy outer layer produces crude palm oil and the seed yields palm kernel oil.

Palm oil is used in a variety of industries from the commercial manufacturing of food and beauty products to the manufacturing of non-food products.

Thursday, April 14, 2011

Palm Oil Processing operation

Crude Palm Oil ProcessingResearch and development work in many disciplines -biochemistry, chemical and mechanical engineering - and the establishment of plantations, which provided the opportunity for large-scale fully mechanised processing, resulted in the evolution of a sequence of processing steps designed to extract, from a harvested oil palm bunch, a high yield of a product of acceptable quality for the international edible oil trade. The oil winning process, in summary, involves the reception of fresh fruit bunches from the plantations, sterilizing and threshing of the bunches to free the palm fruit, mashing the fruit and pressing out the crude palm oil. The crude oil is further treated to purify and dry it for storage and export.


Crude Palm Oil Extraction

Large-scale plants, featuring all stages required to produce palm oil to international standards, are generally handling from 3 to 60 tonnes of FFB/hr. The large installations have mechanical handling systems (bucket and screw conveyers, pumps and pipelines) and operate continuously, depending on the availability of FFB. Boilers, fuelled by fibre and shell, produce superheated steam, used to generate electricity through turbine generators. The lower pressure steam from the turbine is used for heating purposes throughout the factory. Most processing operations are automatically controlled and routine sampling and analysis by process control laboratories ensure smooth, efficient operation. Although such large installations are capital intensive, extraction rates of 23 - 24 percent palm oil per bunch can be achieved from good quality Tenera (DxP).

Conversion of crude palm oil to refined oil involves removal of the products of hydrolysis and oxidation, colour, odor and flavour. After refining, the oil may be separated (fractionated) into liquid (olein) and solid phases (stearin) by thermo-mechanical means (controlled cooling, crystallization, and filtering), and the liquid fraction (olein) is used extensively as a liquid cooking oil in tropical climates, competing successfully with the more expensive groundnut, corn, and sunflower oils.

Palm Kernel Extraction

Extraction of oil from the palm kernels is generally separate from palm oil extraction, and will often be carried out in mills that process other oilseeds (such as groundnuts, rapeseed, cottonseed, shea nuts or copra).

The stages in this process comprise grinding the kernels into small particles, heating (cooking), and extracting the oil using an oilseed expeller  or petroleum-derived solvent. The oil (Crude Palm Kernel Oil) then requires clarification in a filter press or by sedimentation. Extraction is a well-established industry, with large numbers of international manufacturers able to offer equipment that can process from 10 kg to several tonnes per hour.

Palm oil processors of all sizes go through these unit operational stages. 
They differ in the level of mechanisation of each unit operation and the interconnecting materials transfer mechanisms that make the system batch or continuous. The scale of operations differs at the level of process and product quality control that may be achieved by the method of mechanisation adopted.

The general flow diagram is as follows:

PALM OIL PROCESSING UNIT OPERATIONS Palm Oil Machine Process
Harvesting technique and handling effects
In the early stages of fruit formation, the oil content of the fruit is very low. 
As the fruit approaches maturity the formation of oil increases rapidly to about 50 percent of mesocarp weigh. 
In a fresh ripe, un-bruised fruit the free fatty acid (FFA) content of the oil is below 0.3 percent.

However, in the ripe fruit the exocarp becomes soft and is more easily attacked by lipolytic enzymes, especially at the base when the fruit becomes detached from the bunch. The enzymatic attack results in an increase in the FFA of the oil through hydrolysis. Research has shown that if the fruit is bruised, the FFA in the damaged part of the fruit increases rapidly to 60 percent in an hour. There is therefore great variation in the composition and quality within the bunch, depending on how much the bunch has been bruised.

Harvesting involves the cutting of the bunch from the tree and allowing it to fall to the ground by gravity. Fruits may be damaged in the process of pruning palm fronds to expose the bunch base to facilitate bunch cutting.

As the bunch (weighing about 25 kg) falls to the ground the impact bruises the fruit. During loading and unloading of bunches into and out of transport containers there are further opportunities for the fruit to be bruised.

Sometimes trucks and push carts, unable to set bunches down gently, convey the cargo from the collection centers to the processing site. Again, tumbling the fruit bunches from the carriers is rough, resulting in bruising of the soft exocarp. In any case care should be exercised in handling the fruit to avoid excessive bruising.

One answer to the many ways in which harvesting, transportation and handling of bunches can cause fruit to be damaged is to process the fruit as early as possible after harvest, say within 48 hours. However the author believes it is better to leave the fruit to ferment for a few days before processing. Connoisseurs of good edible palm oil know that the increased FFA only adds ‘bite’ to the oil flavour. At worst, the high FFA content oil has good laxative effects. The free fatty acid content is not a quality issue for those who consume the crude oil directly, although it is for oil refiners, who have a problem with neutralization of high FFA content palm oil.

The main point of clarification is to separate the oil from its entrained impurities. The fluid coming out of the press is a mixture of palm oil, water, cell debris, fibrous material and ‘non-oily solids’. Because of the non-oily solids the mixture is very thick (viscous). Hot water is therefore added to the press output mixture to thin it. The dilution (addition of water) provides a barrier causing the heavy solids to fall to the bottom of the container while the lighter oil droplets flow through the watery mixture to the top when heat is applied to break the emulsion (oil suspended in water with the aid of gums and resins). Water is added in a ratio of 3:1. The diluted mixture is passed through a screen to remove coarse fibre.

The screened mixture is boiled from one or two hours and then allowed to settle by gravity in the large tank so that the palm oil, being lighter than water, will separate and rise to the top. The clear oil is decanted into a reception tank. This clarified oil still contains traces of water and dirt.
To prevent increasing FFA through autocatalytic hydrolysis of the oil, the moisture content of the oil must be reduced to 0.15 to 0.25 percent.

Re-heating the decanted oil in a cooking pot and carefully skimming off the dried oil from any engrained dirt removes any residual moisture. Continuous clarifiers consist of three compartments to treat the crude mixture, dry decanted oil and hold finished oil in an outer shell as a heat exchanger.
Palm Oil Machine Process



















Fats and Oils: Formulating and Processing for Applications, Second EditionRapeseed and Canola Oil: Production, Processing, Properties, and UsesPractical Guide to Vegetable Oil ProcessingEdible Oil Processing (Sheffield Chemistry and Technology of Oils and Fats)Vegetable Oils in Food Technology: Composition, Properties, and Uses (Sheffield Chemistry and Technology of Oils and Fats)

No comments:

Post a Comment